Search for: All records

Functional electrical stimulation is a promising technique for restoring arm function to those with paralysis from a high spinal cord injury. While simple controllers are easy to implement, model-based controllers are likely better equipped to leverage the arm’s kinematic and dynamic complexity, particularly for the high variations associated with functional arm movement. One modelling technique for a model-based controller is Gaussian Process Regression. Previous simulation work has shown promise leveraging whole-arm error data to identify the arm’s various subsystems, but used perfect simulated data. We asked caregivers to correct a robotic arm’s movement as simulated muscles generated torque. The simulated muscles were controlled as if they were electrically stimulated human arm muscles. This study demonstrates non-expert caregivers’ ability to collect this error data via whole-arm corrections, and provides insight into their ability to improve arm subsystem models made with Gaussian Process Regression. Despite significant error in caregivers’ ability to provide force corrections to hold the robot in a static configuration, these corrections were leveraged to significantly improve muscle models; the muscles that improved the most were the ones primarily used to move the physiologically actuated robot. 

IntroductionIndividuals who have suffered a cervical spinal cord injury prioritize the recovery of upper limb function for completing activities of daily living. Hybrid FES-exoskeleton systems have the potential to assist this population by providing a portable, powered, and wearable device; however, realization of this combination of technologies has been challenging. In particular, it has been difficult to show generalizability across motions, and to define optimal distribution of actuation, given the complex nature of the combined dynamic system. MethodsIn this paper, we present a hybrid controller using a model predictive control (MPC) formulation that combines the actuation of both an exoskeleton and an FES system. The MPC cost function is designed to distribute actuation on a single degree of freedom to favor FES control effort, reducing exoskeleton power consumption, while ensuring smooth movements along different trajectories. Our controller was tested with nine able-bodied participants using FES surface stimulation paired with an upper limb powered exoskeleton. The hybrid controller was compared to an exoskeleton alone controller, and we measured trajectory error and torque while moving the participant through two elbow flexion/extension trajectories, and separately through two wrist flexion/extension trajectories. ResultsThe MPC-based hybrid controller showed a reduction in sum of squared torques by an average of 48.7 and 57.9% on the elbow flexion/extension and wrist flexion/extension joints respectively, with only small differences in tracking accuracy compared to the exoskeleton alone. DiscussionTo realize practical implementation of hybrid FES-exoskeleton systems, the control strategy requires translation to multi-DOF movements, achieving more consistent improvement across participants, and balancing control to more fully leverage the muscles' capabilities. 

Individuals with paralyzed limbs due to spinal cord injuries lack the ability to perform the reaching motions necessary to every day life. Functional electrical stimulation (FES) is a promising technology for restoring reaching movements to these individuals by reanimating their paralyzed muscles. We have proposed using a quasi-static model-based control strategy to achieve reaching controlled by FES. This method uses a series of static positions to connect the starting wrist position to the goal. As a first step to implementing this controller, we have completed a simulated study using a MATLAB based dynamic model of the arm in order to determine the suitable parameters for the quasi-static controller. The selected distance between static positions in the path was 6 cm, and the amount of time between switching target positions was 1.3 s. The final controller can complete reaches of over 30 cm with a median accuracy of 6.8 cm.